CARBIDE SHELF BLOCKS:Extend the life of your kiln shelves by keeping them glaze and booger free.Compressed carbide block with handle 1” x 3” x 6”$18.50
KILN CEMENT & PATCH:SAIRSET brand.
Cement for mortaring cracks in kilns.$ 9.00/pint$ 28.50/gal. Patch for filling chipped soft bricks in kilns$ 7.95/pint
KILN FURNITURE:
Skutt Kits:Shelves and triangular posts.Designed specifically for Skutt kilns but fit most multi-sided and round kilns.Shelf dimensions below. Kilns 818 and smaller 3 each of 1” thru 6” lengths Kilns 1018 and larger6 each of 1” thru 6” lengths
Kiln Furniture Kit
MODEL 1627-3” 8 – 1” 1227 half shelves and 8 – 1” 13x16” shelves, 5 small post assortment kits.$1135.00 MODEL 1218-3” 6 – 1” half shelves, 1 large post assortment kit$ 500.00 MODEL 1227-3” & 1231-3” 8 – 1” half shelves with 1-1/2” post assort.kit$ 650.00 MODEL 1027 8 – 5/8” half shelves with 1-1/2” post assort. kit$ 380.00 MODEL 1027-3” 8 – 5/8” half shelves with 1-1/2” post assort. kit$ 375.00 MODEL 1018 6 – 5/8” half shelves with 1-1/2” post assort. kit$ 310.00 MODEL 1018-3” 6 – 5/8” half shelves with 1-1/2” post assort. kit$ 305.00 MODEL 818 & 818P 2 – 5/8” full shelves, 3 – 5/8” half shelves with 1-1/2” post assortment kit$ 205.00 MODEL 818-3” & 818P-3” 2 – 5/8” full shelves, 3 – 5/8” half shelves with 1-1/2” post assortment kit$ 200.00 MODEL 714 1 – 5/8” full shelves, 1 – 5/8” half shelves with 1-1/2” post assortment kit$ 96.00 MODEL 614-3” & 609 1 – 5/8” full shelves, 1 – 5/8” half shelves with 1-1/2” post assortment kit$77.00
INDIVIDUAL SHELVES:Corderite, very fragile.No warranty on shelves, please inspect all shelves at time of purchase or upon receipt of shipment.All kiln shelves are subject to warping at high temperatures and should be flipped often to keep them straight.
WHOLE
9.25 x 10 x 5/8"(609 / 614) Δ6
Multi-sided
$14.90
13 x 1/2(714/pinto/GP706) ∆6
Round
$16.50
15 x5/8(818/818-3/GM814/818) ∆6
Round
$19.10
20 x 3/4"(1018-3/1027-3/GM1014/1018) ∆6
Round
$33.30
21 x 3/4"(1018 / 1027) ∆10
Round
$38.20
HALF
9.25 x 5 x 5/8"(609 / 614) ∆6
Multi-sided
$8.40
13 x 6.5 x 1/2(714 / pinto) ∆6
Round
$12.00
15 x 7.5 x 5/8(818 / 818-3) ∆6
Round
$12.90
20 x 10 x 3/4"(1018-3 / 1027-3) ∆6
Round
$17.70
21 x 11 x 5/8"(1018 / 1027/ GM1414) ∆10
Multi-sided
$19.30
26 x 13 x 5/8"(1227 / 1231) ∆10
Multi-sided
$24.00
26 x 13 x 1"(1227/1231/GM1227) ∆10
Multi-sided
$36.40
RECTANGULAR
9 x 8 x 1/2"(10F / 12 F / GM 10F) ∆6
Rectangular
$13.20
16 x 13 x 1"(1627) ∆10
Rectangular
$39.80
16" X 16" X 5/8"∆10
Square
$26.60
18 x 18 x 5/8"∆6
Square
$39.50
20 x 10 x 1"(GAS) ∆10
Rectangular
$26.80
20 x 20 x 5/8"(GAS / GM 22CS) ∆10
Square
$44.50
21 x 18 x 5/8”(GM 1414) ∆6
Rectangular
$44.60
24 x 12 x 1"(GAS) ∆10
Rectangular
$44.30
26 x 13 x 1"(GAS) ∆10
Rectangular
$58.00
CORELITE SHELVES: High thermal shock resistant extruded refractory slab composed of a mullite / cordierite composition suitable to cone 10 firing temps. The hollow shelves 30-45% lighter which helps prevent back strain. Additionally, it lowers the firing cost & shipping cost. Also, the top & bottom are ground for perfect flatness, great for glass!
KAOWOOL 2300° 50 sq. ft. roll per case (24” x 25’), 1” thick, 6# density. Cut to size$4.25/sq.ft. Case roll $ 97.50 INSWOOL 2600° 50 sq. ft roll per case (24" x 25'), 1" thick, 8# density.
Cut to size $ 6.50/sq.ft. Case roll $ 157.50
KILN INSULATING BOARD:
Dilloboard, 24” x 48” x 1”.Great
for making large fusing shelves for
warm glass. 6 sheets per case.
$ 87.50/sheet$ 450.00/case
Fiber Board, 36" x 12" x 1". Used for insulation. 16 sheets per case. $ 10.95/sheet $ 116.75/case
KILN PEEPHOLE PLUGS:
Skutt brand.Porcelain kiln plugs,
very fragile. Individually packaged.
$3.50
Image:
KILN SITTER PARTS:For Dawson kiln sitters.Please state kiln model when ordering. Cone supports – pair$ 7.50 Firing gauge$ 4.25 Shut off tube assembly$ 45.00 Sensing Rod$7.50
KILNWASH:Mix well with water.Brush two coats on top of shelves only.
2#$ 4.50 5#$ 7.50
Knob Hardware: The female insert measures 1/2" L x 1/4" W. The screw is 1"L. $ .20
