- Low-Fire Glazes (04-06)
- Mayco Low-Fire Glazes
- Specialty Glazes
- White Cobblestone (SG-202)
White Cobblestone (SG-202)
5.1 14.95 $5.10 - $14.95
Cobblestones create a textured “cobbled” surface when fired. Apply over another glaze and during the firing process, a shattered pattern of raised, irregular chips will emerge. The underlying glaze will appear in the cracks. To create colored Cobblestones, brush Stroke & Coat® glaze of choice over the white Cobblestone and fire.
Cone 06: A white shattered pattern of raised, irregular chips will emerge. The underlying glaze will appear in the cracks.
Cone 6: Glaze will bead up on the surface of the piece. If applied over another glaze the texture flattens with similar cobblestone pattern.
Certified AP on-Toxic and Food safe; however not recommended for food surfaces due to surface characteristics.
Shake for 5-6 seconds before use. Dispense glaze onto a palette (tile, plate, etc.) and apply 2 coats with a broad, soft brush, such as a CB-604 #4 Soft Fan Brush. Apply the second coat while the first coat is still damp: do not allow Cobblestone to dry between coats. Pattern break-up is determined by the application direction of the brush stroke. Large break up heavier application, small breakup lighter application. If application is too light the cobblestone will not break up. Reapplying and touching up will not achieve a break up. Fire to shelf cone 06 or higher.